manualshive.com logo in svg

Asus P9A-I Series, Руководство пользователя, Страница: 95 / 136

Поделиться
Скачать
Asus P9A-I Series Скачать руководство пользователя страница 95

ASUS P9A-I Series

4-53

        

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.

 Main  Advanced  IntelRCSetup

  

Server Mgmt

 

 Event Logs  Security  Boot  Monitor  Tool  Exit

  IPv6 BMC Network Configuration

  IPv6 Display Full Field          [Enable]

  IPv6 Display Full Formula        [Enable]

  IPv6 Display Letter Case         [Upper Case]

  IPv6 BMC DM_LAN1:

 

 IPv6 BMC Lan Option              [Enable]

  IPv6 BMC Lan IP Address source   [Previous State]

  DM_LAN1 IP Address in BMC:       0:0:0:0:0:0:0:0

  DM_LAN1 Prefix Length in BMC:     64

  DM_LAN1 Gateway Address in BMC : 0:0:0:0:0:0:0:0

  DM_LAN1 MAC Address in BMC:      00.1F.C6.00.00.07

  DM_LAN1 Address Source in BMC:   DHCP Mode
  IPv6 BMC LAN1

  IPv6 BMC Lan Option              [Enable]

  IPv6 BMC Lan IP Address source   [Previous State]

  LAN1 IP Address in BMC:          0:0:0:0:0:0:0:0

  LAN1 Prefix Length in BMC:        0

  LAN1 Gateway Address in BMC:     0:0:0:0:0:0:0:0

  LAN1 MAC Address in BMC:         00.00.00.00.00.00

  LAN1 Address Source in BMC:      DHCP Mode

4.6.5 

IPv6 BMC Network Configuration

This menu displays the FRU information.

Display the Full or Brief 

IPv6 Field

        

Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.

 Main  Advanced  IntelRCSetup

  

Server Mgmt

 

 Event Logs  Security  Boot  Monitor  Tool  Exit

  No. of log entries in SEL : 0
  << System Event Log IS Empty >>

  01/01/2000 01:19:45  Smbios 0x16  N/A

4.6.4 

View System Event Log

This menu displays all system event logs.

DESCRIPTION

Log Area Reset

IPv6 Display Full Field [Enable]

Enable this item to display the full or brief IPv6 field. Configuration options: [Disable] [Enable]

IPv6 Display Full Formula [Enable]

Enable this item to display the full or brief IPv6 formula. Configuration options: [Disable] 

[Enable]

IPv6 Display Letter Case [Upper Case]

Configuration options: [Lower Case] [Upper Case]

IPv6 BMC Lan Option [Enable]

Enables or disables the IPv6 BMC LAN channel. When set to [Disable], BMC networking 

cannot be modified during the BIOS phase. Configuration options: [Disable] [Enable]

IPv6 BMC Lan IP Address source [Previous State]

Select to configure LAN channel parameters statically or dynamically (by BIOS or BMC). 

Unspecified option will not modify any BMC network parameters during BIOS phase. 

Configuration options: [Previous State] [Static] [Dynamic-Obtained by BMC running DHCP]

Содержание P9A-I Series









































































































































Отзывы:

Нет отзывов