Asus P9A-I Series Скачать руководство пользователя страница 125

Страница: 125 / 136

ASUS P9A-I Series

5-19

5.5

Installing the Intel

I354 Gigabit Adapters driver

This section provides the instructions on how to install the

Intel

I354 Gigabit Adapters

sdriver on the system.
To install the

Intel

I354 Gigabit Adapters

driver on Windows

Server 2008 R2:

Restart the computer.

2. Log on with

Administrator

privileges.

Insert the motherboard/system support DVD to the optical drive.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

Bin

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

4. Click

Intel I354 Gigabit Adapters Driver

in the

Drivers

tab of the main screen to

start the installation.

5. Click

Next

to continue.

From the

Program Maintenance

window,

select

Modify

then click

Next.

Содержание P9A-I Series









































































































































Результаты поиска

Содержание P9A-I Series

Отзывы:

Asus P9A-I Series, Руководство пользователя, Страница: 125 / 136

Результаты поиска

Содержание P9A-I Series

Отзывы: