Asus P8Z77 WS Скачать руководство пользователя страница 96

Страница: 96 / 176

3-26

Chapter 3: BIOS setup

Chapter 3

3.5.5

USB Configuration

The items in this menu allow you to change the USB-related features.

The

USB Devices

item shows the auto-detected values. If no USB device is detected, the

item shows

None

Legacy USB Support [Enabled]

[Enabled]

Enables the support for USB devices on legacy operating systems (OS).

[Disabled]

The USB devices can be used only for the BIOS setup program.

[Auto]

Allows the system to detect the presence of USB devices at startup. If

detected, the USB controller legacy mode is enabled. If no USB device is

detected, the legacy USB support is disabled.

Legacy USB3.0 Support [Enabled]

This item appears only when you set the previous item to [Auto] or [Enabled] and allows you

to enable or disable the Legacy USB 3.0 Support.
[Enabled]

Enables the support for USB 3.0 devices on legacy operating systems

(OS).

[Disabled]

Disables the function.

Intel xHCI Mode [Smart Auto]

Allows you to select the Intel xHCI Mode.

Configuration options: [Smart Auto] [Auto] [Enabled] [Disabled]

EHCI Hand-off [Disabled]

[Enabled]

Enables the support for operating systems without an EHCI hand-off

feature.

[Disabled]

Disables the function.

Содержание P8Z77 WS

















































































































































































Результаты поиска

Содержание P8Z77 WS

Отзывы:

Asus P8Z77 WS, Руководство пользователя, Страница: 96 / 176

Результаты поиска

Содержание P8Z77 WS

Отзывы: