background image

Chapter 2: BIOS information

2-11

2.4 

Ai Tweaker menu

The Ai Tweaker menu items allow you to configure overclocking-related items.

Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field 

values can cause the system to malfunction.

Scroll down to display the following items:

v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.

BIOS SETUP UTILITY

 Main    

Ai Tweaker

    Advanced    Power    Boot    Tools    Exit

[D.O.C.P.]

It's designed to 

overclock DRAM 

frequency by adjusting 

BCLK frequency.

[X.M.P.]

When X.M.P. is enabled 

BLCK frequency, CPU 

ration and memory 

parameters will be 

auto optimized.

←→

   Select Screen

↑↓

    Select Item

Enter Go to Sub Screen

F1    General Help

F10   Save and Exit

ESC   Exit

Configure System Performance Settings

Ai Overclock Tuner 

  [Auto]

CPU Ratio Setting 

  [20.0]

Intel(R) SpeedStep(TM) Tech 

  [Disabled]

Xtreme Phase Full Power Mode 

  [Auto]

DRAM Frequency 

  [Auto]

QPI Frenquency 

  [Auto]

 DRAM Timing Control

CPU Differential Amplitude 

  [Auto]

CPU Clock Skew 

  [Auto]

CPU Voltage Mode 

  [Offset]

  Offset Voltage 

  [Auto]

IMC Voltage 

  [Auto]

DRAM Voltage 

  [Auto]

CPU PLL Voltage 

  [Auto]

PCH Voltage 

  [Auto]

v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.

DRAM DATA REF Voltage on CHA 

  [Auto]

DRAM DATA REF Voltage on CHB 

  [Auto]

Auto PSI 

  [Enabled]

Load-Line Calibration 

  [Auto]

PCIE Spread Spectrum 

  [Disabled]

PCI/PCIe CLK Status 

  [Enabled]

The configuration options for this chapter vary depending on the CPU and DIMM model you 

installed on the motherboard.

2.4.1 

Ai Overclock Tuner [Auto]

Allows selection of CPU overclocking options to achieve desired CPU internal frequency. 

Select either one of the preset overclocking configuration options:

Manual

Allows you to individually set overclocking parameters.

Auto

Loads the optimal settings for the system.

D.O.C.P

Overclocks DRAM frequency by adjusting BCLK frequency.

X.M.P.

If you install memory module(s) supporting the eXtreme Memory Profile (X.M.P.) 

Technology, choose this item to set the profile(s) supported by your memory 

module(s) for optimizing the system performance.

Содержание P7H55-M





































































Отзывы: