
2-32
Chapter 2: Hardware information
Chapter 2
6.
Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s).
Connect the S/PDIF Out module cable to this connector, then install the module to a
slot opening at the back of the system chassis.
The S/PDIF module is purchased separately.
7.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
•
We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
•
If you want to connect a high-definition front panel audio module to this connector, set
the
Front Panel Type
item in the BIOS setup to
[HD Audio];
if you want to connect an
AC'97 front panel audio module to this connector, set the item to
[AC97]
. By default,
this connector is set to
[HD Audio]
.
Содержание P7H55 DVI
