Asus P6300 Series, Руководство по установке

Страница: 9 / 31

¿ ù » ~
!
© |¥ ¼ © w ¸ q¼ Ë ¦ ¡ ¡ C
5
M
ICROSOFT
W
INDOWS
95 E
NVIRONMENT
It is easy to set up Windows. Please refer to your Microsoft Windows 95 Installation Guide to install Windows 95
Operation System.
Note :
Regarding CD-ROM driver in Windows 95, you should use Windows 95's CD-ROM driver
instead of the DOS real-mode CD-ROM driver. A DOS driver has worse performance and
wastes memory, also may cause problems. You can remove the DOS real-mode CD-ROM
driver after you have already installed "PIIX4Patch" described later by doing the following:
1. Remove the "Device=<cdrom>.SYS ..." line in C:\CONFIG.SYS file. (The driver filename
depends on which driver you installed).
2. Remove the "MSCDEX ..." line in C:\AUTOEXEC.BAT file.
Of course, you will need the DOS driver if you start the installation from a blank HDD. You
need this driver to access the Windows 95 CD or our driver CD. Also, the original Windows 95
cannot recognize the Intel chipset, so the original Win95 cannot detect the CD-ROM by itself.
That is the reason you need the CD-ROM's DOS driver during the installation of Windows 95.
Intel provides the "PIIX4Patch" program to let Windows 95 detect the Intel's PCI bridge, so
that Windows 95 can detect the CD-ROM.