Asus P6300 Series, Руководство по установке, Страница: 19 / 31

¿ ù » ~
!
© |¥ ¼ © w ¸ q¼ Ë ¦ ¡ ¡ C
15
•
Click on "Browse" to locate the Infrared driver from the Driver & Utility CD-ROM disc, the
path is "D:\irda\nsc", then click on "OK".
•
Click on "OK" to confirm "Install From Disk".
•
Select "OEM Laptop Fast Infrared Port", then click on "OK".
•
Specify your Windows 95 CD-ROM disc path, then click on "OK".
•
Select "Change Settings", then click on "Next".
•
Select the configurations of COM, Interrupt Level, and DMA Channel based on your Generic Ir
Serial Port COM2 setting. The recommended setting is COM2, Interrupt Level 3, DMA
Channel 3.
•
Select "IBM or TEMIC" in the Dongle Type, then press "Next".
•
Select "Use Default Ports" for simulated serial and parallel ports, then click on "Next".
•
Click on "Finish", then click on "OK" to restart your computer.
Step 2. Install Fast IR stack and additional software to support networking:
•
After Windows 95 restarted, double-click on "My Computer", double-click on "Control Panel",
double-click on "Network".
•
Select "OEM Laptop Fast Infrared Port", click on "Properties", then click on "Advanced" tab.
Make sure you have values on following items: DMA Channel 3, Dongle Type IBM or TEMIC,
Interrupt Level 3, UartloBaseAddress COM2.
•
Highlight "OEM Laptop Fast Infrared Port".
•
Click on "Add", select "Protocol", then click on "Add".
•
Click on "Have Disk".
•
Click on "Browse", select folder "\irda", file name "fastir.inf", then click on "OK".
•
Click on "OK" to confirm "Install From Disk".
•
Click on "OK" to confirm the Fast Infrared Protocol installation, then click on "OK".
•
Click on "Identification" tab, and input your computer name and workgroup name, then press
"OK".
•
Specify your Windows 95 CD-ROM disc path, then click on "OK".
•
Click on "Yes" to reboot your Notebook PC.