Asus P5QL-I SI страница 28 Скачать руководство пользователя

Страница: 28 / 40

ASUS P5QL-I/SI

2-3

• Enter the BIOS setup program. Go to the

Tools

menu to select

EZ Flash 2

and

press

<Enter>

to enable it.

Press

<Tab>

to switch between drives until the correct BIOS file is found.

When the correct BIOS file is found, EZ Flash 2 performs the BIOS update process

and automatically reboots the system when done.

2.1.3

ASUS CrashFree BIOS 3 utility

The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file

when it fails or gets corrupted during the updating process. You can update a corrupted BIOS

file using the motherboard support CD or a USB flash disk that contains the updated BIOS

file.

• Prepare the motherboard support CD or the USB flash disk containing the updated

motherboard BIOS before using this utility.

• Always connect the SATA cables to the SATA1-4 connectors. Otherwise, the utility will

not function.

Bad BIOS checksum. Starting BIOS recovery...

Checking for CD-ROM...

CD-ROM not found!

Checking for USB Device...

Recovering the BIOS

To recover the BIOS:
1.

Turn on the system.

Insert the support CD or USB flash disk containing the BIOS file to the optical drive or

USB port.

The utility displays the following message and automatically checks the support CD or

USB flash disk for the BIOS file.

When found, the utility reads the BIOS file and starts erasing the corrupted BIOS file.

Bad BIOS checksum. Starting BIOS recovery...

Checking for USB Device...

USB Device found.

Reading file “P5QLI.ROM”. Completed.

Start Erasing...\

• Only a USB flash disk with

FAT 32/16

format and single partition can support the ASUS

EZ Flash 2 utility.

• Do not shut down or reset the system while updating the BIOS to prevent system boot

failure!

Содержание P5QL-I SI









































Результаты поиска

Содержание P5QL-I SI

Отзывы:

Похожие инструкции для P5QL-I SI

Бренды по названию

Популярные бренды

Asus P5QL-I SI, Руководство пользователя

Результаты поиска

Содержание P5QL-I SI

Отзывы:

Похожие инструкции для P5QL-I SI

Бренды по названию

Популярные бренды