Asus P5Q3 Deluxe/WiFi-AP@n Скачать руководство пользователя страница 57

Страница: 57 / 190

ASUS

P5Q3 Deluxe/WiFi-AP@n

2-29

5. SIL5723 Serial ATA connectors [orange]

(7-pin SATA_E1 [orange, port 0]; SATA_E2 [white, port 1])

These connectors are for the Serial ATA signal cables for Serial ATA hard

disk drives. If you installed Serial ATA hard disk drives, you can create a

Backup

or a

Super Speed

configuration with the Drive Xpert Technology

through the onboard Silicon Image

SIL5723 controller.

Before using the Drive Xpert technology, make sure that you have connected

the SATA signal cables and installed SATA hard disk drives.

• The SATA_E1 (orange, port 0) and SATA_E2 (white, port 1) ports are for

SATA hard drives only. ATAPI device is not supported.

• Make necessary backup before using the

Drive Xpert

function:

All original data of the SATA_E2 (white, port1) hard drive will be erased for

EZ Backup

setup.

All original data of the two hard drives will be erased for

Super Speed

setup.

SATA_E1 (orange, Port 0)

SATA_E2 (white, Port 1)

Содержание P5Q3 Deluxe/WiFi-AP@n































































































































































































Результаты поиска

Содержание P5Q3 Deluxe/WiFi-AP@n

Отзывы:

Бренды по названию

Популярные бренды

Asus P5Q3 Deluxe/WiFi-AP@n, Руководство пользователя

Результаты поиска

Содержание P5Q3 Deluxe/WiFi-AP@n

Отзывы:

Бренды по названию

Популярные бренды