Asus P5B Deluxe WiFi-AP Скачать руководство пользователя страница 52

Страница: 52 / 164

Chapter : Hardware information

2.7.2

Internal connectors

1. Floppy disk drive connector (34-1 pin FLOPPY)

This connector is for the provided floppy disk drive (FDD) signal cable. Insert

one end of the cable to this connector, then connect the other end to the

signal connector at the back of the floppy disk drive.

Pin 5 on the connector is removed to prevent incorrect cable connection when

using a FDD cable with a covered Pin 5.

2. IDE connector (40-1 pin PRI_IDE)

The onboard IDE connector is for the Ultra DMA 133/100/66 signal cable.

There are three connectors on each Ultra DMA 133/100/66 signal cable:

blue, black, and gray. Connect the blue connector to the motherboard’s IDE

connector, then select one of the following modes to configure your device.

• Pin 20 on the IDE connector is removed to match the covered hole on the

Ultra DMA cable connector. This prevents incorrect insertion when you

connect the IDE cable.

• Use the 80-conductor IDE cable for Ultra DMA 133/100/66 IDE devices.

If any device jumper is set as “Cable-Select,” make sure all other device

jumpers have the same setting.

Drive jumper setting

Mode of

device(s)

Cable connector

Single device

Cable-Select or Master

Black

Two devices

Cable-Select

Master

Black

Slave

Gray

Master

Black or gray

Slave

P5B Deluxe

P5B Deluxe Floppy disk drive connector

NOTE:

Orient the red markings on

the floppy ribbon cable to PIN 1.

PIN 1

FLOPPY

Содержание P5B Deluxe WiFi-AP





































































































































































Результаты поиска

Содержание P5B Deluxe WiFi-AP

Отзывы:

Похожие инструкции для P5B Deluxe WiFi-AP

Бренды по названию

Популярные бренды

Asus P5B Deluxe WiFi-AP, Руководство пользователя

Результаты поиска

Содержание P5B Deluxe WiFi-AP

Отзывы:

Похожие инструкции для P5B Deluxe WiFi-AP

Бренды по названию

Популярные бренды