Asus P4S800-X Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 64

background image

2-10

Chapter 2: BIOS Setup

2.3.1 Primary and Secondary Master/Slave

Supervisor Password [Disabled] / User Password [Disabled]

These fields allow you to set passwords. To set a password, highlight the
appropriate field and press <Enter>. Type in a password then press <Enter>. You
can type up to eight alphanumeric characters. Symbols and other characters are
ignored. To confirm the password, type the password again and press <Enter>.
The password is now set to [Enabled]. This password allows full access to the
BIOS Setup menus. To clear the password, highlight this field and press <Enter>.
The same dialog box as above appears. Press <Enter>. The password is set to
[Disabled].

A note about passwords

The BIOS Setup program allows you to specify passwords in the Main menu. The passwords
control access to the BIOS during system startup. Passwords are not case sensitive,
meaning, passwords typed in either uppercase or lowercase letters are accepted. The BIOS
Setup program allows you to specify two different passwords: a Supervisor password and a
User password. If you did not set a Supervisor password, anyone can access the BIOS
Setup program. If you did, the Supervisor password is required to enter the BIOS Setup
program and to gain full access to the configuration fields.

Forgot the password?

If you forget your password, you can clear it by erasing the CMOS Real Time Clock (RTC)
RAM. The RAM data containing the password information is powered by the onboard button
cell battery. If you need to erase the CMOS RAM, unplug the all the power cables and
remove the button cell battery. Re-install the battery after about 2 seconds, then power up the
system.

Halt On [All Errors]

This field specifies the types of errors that will cause the system to halt.
Configuration options: [All Errors] [No Error] [All but Keyboard] [All but Disk]
[All but Disk/Keyboard]

Installed Memory [XXX MB]

This field automatically displays the amount of conventional memory detected by
the system during the boot process.

«
...
42
43
44
45
46
...
»

Содержание P4S800-X

































































Отзывы:

Нет отзывов

Похожие инструкции для P4S800-X

Бренд: Yamaha Страницы: 87

Бренд: AOpen Страницы: 105

MBATX-845GV-VEAH

Бренд: Kontron Страницы: 70

Бренд: Ublox Страницы: 21

Бренд: BCM Страницы: 5

Бренд: ASROCK Страницы: 154

Z690M DS3H DDR4

Бренд: Gigabyte Страницы: 36

Бренд: Ideal-Standard Страницы: 20

Бренд: IBASE Technology Страницы: 64

B85M-P32 series

Бренд: MSI Страницы: 186

Бренд: Intel Страницы: 113

Бренд: Variscite Страницы: 2

Бренд: Microchip Technology Страницы: 44

Бренд: WynMax Страницы: 68

Track bq27520EVM

Бренд: Texas Instruments Страницы: 22

Бренд: Fastfame Страницы: 41

Бренд: MSI Страницы: 45

Supero C9X299-PG300F

Бренд: Supermicro Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды