Asus Network Device CRW-3212A Скачать руководство пользователя

Страница: 1 / 18

ASUS CRW-3212A User’s Manual

Welcome!

Thank you for buying the ASUS CRW-3212A Drive!

To ensure proper installation and use of this device, read the instructions
and other important information contained in this manual.

Product Introduction

Specifications

The CRW-3212A has the following specifications.

•

Speeds

32X, 24X, 16X, 12X, 8X, 4X writes
12X, 10X, 8X, 4X, 2X rewrites
16X~40X reads

•

Interface

ATAPI specification

•

Technology support

FlextraSpeed™ Technology
FlextraLink™ Technology
Double Dynamic Suspension System II (DDSS II)
Zone CLV Recording Technology

•

Data buffer size

2MB

•

Application discs

12cm or 8cm diameter, 1.2mm thick
CD-Audio, CD-ROM, CD-ROM/XA, CD-I,
Mixed Mode CD-ROM, Photo CD, CD-Extra,
Video CD, CD-Text, DVCD, CD-G, Karaoke
CD, I-trax, Bootable CD

•

Recording form

Orange Book Part 2, 3
Disc-at-once, Track-at-once
Session-at-once, Packet write,
Overburn, DAO-RAW mode

•

OS compatibility

MS-Windows 98/98SE/ME/2000/XP/NT
SCO Unix, Linux, Netware, OS/2 Warp

•

Power supply

DC 5 x (1 +/- 5%)V
DC 12 x (1 +/- 10%)V

•

Dimensions

41.5 (h) x 149.0 (w) x 197.5 (d) mm

•

Mass

997 g

NOTE:

Refer to the section “Technical Information” on page 26 for

detailed specifications.

Содержание Network Device CRW-3212A



















Результаты поиска

Содержание Network Device CRW-3212A

Отзывы:

Похожие инструкции для Network Device CRW-3212A

Бренды по названию

Популярные бренды

Asus Network Device CRW-3212A, Руководство пользователя

Результаты поиска

Содержание Network Device CRW-3212A

Отзывы:

Похожие инструкции для Network Device CRW-3212A

Бренды по названию

Популярные бренды