Operating
Instructions
Press the power button to turn the LCD
Monitor
on or off. The other control buttons are located
on the front
bezel. By changing these settings, the picture can be adjusted to your personal preferences.
•
The power cord should be connected.
•
Connect the signal cable from the LCD Monitor to
your computer
.
•
Press the power button to turn on the Monitor. The power LED indicator will light up.
1. SPLENDID
™
Button :
•
Hotkey for switching between 5 advanced video preset modes (Scenery Mode, Standard Mode, Theater
Mode, Game Mode, Night Mode) with SPLENDID™ Video Enhancement Technology.
•
Automatically adjust the image to its optimized position, clock, and phase by pressing the button for 2
seconds.
•
Exit the OSD menu or go back to the previous menu as the OSD menu is activated.
2.
－
/
Button :
•
Activate Volume (MM17T)/ Contrast (MM17D) adjustment menu.
•
Decrease the level of the function selected or move to the previous function as the OSD menu is
activated.
3.
Power Button / Power LED Indicator:
•
Switch the Monitor on or off.
•
LED lights blue(MM17T)/green(MM17D): normal operation mode.
•
LED lights amber: power saving mode.
•
LED is off: power off mode.
4.
＋
/
Button :
•
Activate Brightness adjustment menu.
•
Increase the level of the function selected or move to the next function as the OSD menu is activated.
5.
Menu Button :
•
Activate the OSD (On-Screen Display) main menu.
•
Enter/select the icon(function) highlighted as the OSD menu is activated.
Troubleshooting
No Power - The monitor's power indicator is off.
•
Make sure the monitor power cord is fully inserted in the monitor’s power socket and the electrical outlet.
•
Test the electrical outlet by plugging in a working electrical device such as a lamp.
•
Try another power cord on the monitor. You can use the computer's power cord to perform this test.
No Video - The monitor's power LED indicator is on but there is no image on the screen.
•
Ensure that the signal cable is properly connected the monitor and the computer.
•
Ensure that the computer is on and functioning properly.
•
Turn off the monitor and check the signal cable pins. Make sure none of the pins are bent.
Blurry/Fuzzy Picture.
•
Press the SPLENDID™ Button for 2 seconds to automatically adjust the image.
•
Adjust the Phase and Clock settings via OSD.
•
Turn off the monitor and check the signal cable pins. Make sure none of the pins are bent.
Too Dark/ Light Picture.
•
Adjust the Contrast and Brightness settings via OSD..
No Sound or Sound Is Low (MM17T only).
•
Ensure that the audio cable is properly connected the monitor and the computer
•
Ensure the computer sound card driver is well installed and activated.
•
Adjust the volume settings of both your monitor and computer.
Monitor
Quick Setup Guide
2
