manualshive.com logo in svg

Asus MEW-L, Руководство пользователя

Поделиться
Скачать
Asus MEW-L Скачать руководство пользователя страница 78

78

ASUS MEW-L User’s Manual

5. SOFTWARE SETUP

5. S/W SETUP

Windows 98

5.1.2 Support CD Submenus

NOTE: The support CD contents are subject to change at any time without notice.

Installation Submenu

LDCM: Installs software to monitor PC system(s).

ASUS Probe: Installs a simple utility to monitor your
computer’s fan, temperature, and voltages.

ASUS LiveUpdate: Installs a program to help you
update your BIOS or download a BIOS image file.

Driver: Installs the necessary drivers for your on-
board components to work properly.

Other: Allows you to install additional software and
utilities to help you make better use of your new
motherboard.

Driver

Network Driver Setup: Installs Intel’s 8255x-based
PCI ethernet adapter (10/100).

VGA Driver Setup: Intel’s 810 System and Graph-
ics Controller Driver.

Audio Driver Setup: Installs Intel’s 82801AA/AB
AC’97 Audio Controller: SigmaTel Codec.

Other

INF Update Utility for 810 Chipset: This utility in-
stalls INF files in Windows for the following items:
System and Graphics, LPC Interface, SM Bus, PCI
Bridge, Bus Master IDE, USB Host, Controllers

Intel Security Driver: Installs a security controller
for your Windows 95/98. Read the Release Notes dur-
ing installation and the Readme file at the end of the
installation for more information.

YAMAHA S-YXG50: Installs Yamaha’s software
synthesizer for playing MIDI files on a personal com-
puter through software alone without usinga hard-

ware sound source such as a sound card. (YAMAHA, Soft Synthesizer, S-YXG50, Midplug, and XG
studio are all trademarks of Yamaha Corp. Copyright 1996-1999 Yamaha Corporation, All Rights Re-
served)

YAMAHA XGStudio: Installs Yamaha’s XGStudio Mixer.

Microsoft DirectX 6.0 Driver: Installs Microsoft’s DirectX 6.0 driver for Windows 95/98. Microsoft’s
DirectX is necessary for most multimedia applications to run.

Содержание MEW-L

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды