manualshive.com logo in svg

Asus MEW-L, Руководство пользователя

Поделиться
Скачать
Asus MEW-L Скачать руководство пользователя страница 27

ASUS MEW-L User’s Manual

27

3. HARDWARE SETUP

Expansion Cards

3. H/W SETUP

3.7 Expansion Cards

3.7.1 Expansion Card Installation Procedure

1. Read the documentation for your expansion card and make any necessary  hard-

ware or software settings for your expansion card, such as jumpers.

2. Remove your computer system’s cover and the bracket plate on the slot you

intend to use. Keep the bracket for possible future use.

3. Carefully align the card’s connectors and press firmly.

4. Secure the card on the slot with the screw you removed above.

5. Replace the computer system’s cover.

6. Set up the BIOS if necessary

(such as IRQ xx Used By ISA: Yes in 4.4.3 PCI Configuration)

7. Install the necessary software drivers for your expansion card.

WARNING!

 Unplug your power supply when adding or removing expansion

cards or other system components. Failure to do so may cause severe damage to
both your motherboard and expansion cards.

Содержание MEW-L

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды