Asus M5A88-V EVO, Руководство пользователя

Страница: 74 / 124

3-18 Chapter 3: BIOS setup
Chapter 3
3.5.6 HT Link Speed [Auto]
Allows you to select the HyperTransport link speed. Configuration options: [Auto] [200MHz]
[400MHz] [600MHz] [800MHz] [1000MHz] [1200MHz] [1400MHz] [1600MHz] [1800MHz]
[2000MHz]
3.5.7 GPU Booster [Enabled]
[Enabled] Select [Enabled] to automatically optimize the iGPU frequency.
[Disabled] Select [Disabled] to use a fixed iGPU frequency.
Enhanced iGPU SpeedStep [Auto]
This item appears only when you set the GPU Booster item to [Enabled] and allows you to
set the iGPU clock speed for better 3D performance. Configuration options: [Auto] [Turbo]
[Extreme] [Manual]
GPU Engine Clock [700]
This item appears only when you set the GPU Booster item to [Disabled] or set the
Enhanced iGPU SpeedStep item to [Manual]. Allows you to set the GPU Engine
Clock. Use the <+> and <-> keys to adjust the value. You can also key in the desired
value using the numeric keypad. The values range from 200MHz to 2000MHz.
GPU Power Saving Mode [Enabled]
This item appears only when you set the GPU Booster item to [Enabled].
[Enabled] Select [Enabled] to reduce the iGPU power consumption when the system
is idle.
[Disabled] Disables this function.
3.5.8 OC Tuner Utility
OC Tuner utility automatically overclocks the frequency and voltage of the CPU and DRAM.
Press <Enter> to start auto tuning. It takes around five minutes, and the system will reboot for
several times until auto tuning is completed.
3.5.9 DRAM Timing Configuration
The configuration options for some of the following items vary depending on the DIMMs
you install on the motherboard.
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [4 CLK] ~ [12 CLK]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto] [5 CLK] ~ [12 CLK]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto] [5 CLK] ~ [12 CLK]