Asus M4N98TD EVO Скачать руководство пользователя страница 78

Страница: 78 / 118

3-22

Chapter 3: BIOS setup

Chapter 3

3.7

Power menu

The Power menu items allow you to change the settings for the Advanced Power

Management (APM). Select an item then press <Enter> to display the configuration options.

3.7.1

Suspend Mode [Auto]

Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used

for system suspend.
[S1 (POS) only] Sets the ACPI suspend mode to S1/POS (Power On Suspend).
[S3 only]

Sets the ACPI suspend mode to S3/STR (Suspend To RAM).

[Auto]

The system automatically configures the ACPI suspend mode.

3.7.2

ACPI 2.0 Support [Enabled]

[Disabled]

The system will not add additional tables as per ACPI 2.0 specifications.

[Enabled]

The system adds additional tables as per ACPI 2.0 specifications.

3.7.3

ACPI APIC Support [Enabled]

[Disabled]

The system disables the Advanced Configuration and Power Interface

(ACPI) support in the Advanced Programmable Interrupt Controller (APIC).

[Enabled]

The ACPI APIC table pointer is included in the RSDT pointer list.

BIOS SETUP UTILITY

Main Ai Tweaker Advanced

Power

Boot Tools Exit

Select the ACPI state

used for System

Suspend.

←→

Select Screen

↑↓

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Suspend Mode

[Auto]

ACPI 2.0 Support

[Enabled]

ACPI APIC Support

[Enabled]

APM Configuration

Hardware Monitor

USB 2.0 Controller Mode [HiSpeed]

[FullSpeed]

Sets the USB 2.0 controller mode to FullSpeed (12 Mbps).

[HiSpeed]

Sets the USB 2.0 controller mode to HiSpeed (480 Mbps).

Содержание M4N98TD EVO























































































































Результаты поиска

Содержание M4N98TD EVO

Отзывы:

Asus M4N98TD EVO, Руководство пользователя, Страница: 78 / 118

Результаты поиска

Содержание M4N98TD EVO

Отзывы: