Asus M4N98TD EVO Скачать руководство пользователя страница 45

Страница: 45 / 118

ASUS M4N98TD EVO

2-27

Chapter 2

Serial ATA connectors (7-pin SATA1–5)

These connectors are for the Serial ATA signal cables for Serial ATA hard disk and

optical disk drives.
If you install SATA hard disk drives to the SATA1–5 connectors, you can create a RAID

0, 1, 0+1, 5, or JBOD configuration through the onboard nForce

980a SLI controller.

These connectors are set to [IDE Mode] by default. If you intend to create a Serial ATA

RAID set using these connectors, set the

SATA Mode select

item in the BIOS to [RAID

Mode].

• The SATA 5 connector and external SATA port support AHCI mode and RAID mode

only. Ensure to install the AHCI driver or RAID driver in the bundled support DVD before

connecting devices to the connectors. Otherwise, the devices will not work.

• Due to chipset limitation, when you set any of the SATA ports to RAID mode, all SATA

ports run at RAID mode simultaneously.

• You must install Windows

XP Service Pack 2 or later version before using Serial

ATA hard disk drives. The Serial ATA RAID feature is available only if you are using

Windows

XP SP2 or later version.

•

Due to chipset limitation, port multipliers are not supported by the onboard SATA

connectors and the external SATA port.

Содержание M4N98TD EVO























































































































Результаты поиска

Содержание M4N98TD EVO

Отзывы:

Asus M4N98TD EVO, Руководство пользователя, Страница: 45 / 118

Результаты поиска

Содержание M4N98TD EVO

Отзывы: