manualshive.com logo in svg

Asus KFN5-Q - Motherboard - nForce Pro 3600, Руководство пользователя

Поделиться
Скачать
Asus KFN5-Q - Motherboard - nForce Pro 3600 Скачать руководство пользователя страница 47

2-26

Chapter 2: Hardware information

4.  BIOS Recovery (3-pin RECOVERY1)

 

This jumper allows you to recover your original BIOS from a floppy disk 

in case the BIOS codes and data are corrupted. 

 

To recover the BIOS:

 

1.  Turn OFF your computer and unplug the power cord.

 

2.   Move the jumper cap from pins 2-3 (default) to pins 1-2. 

 

3.  Insert a floppy disk with the original or updated BIOS file. The BIOS 

file name is 

I8044A00.ROM

 

4.  Plug the power cord and turn ON the computer.

 

5.  The system searches for the BIOS file in the floppy then reflashes  

 

the BIOS.

 

6.  When finished, shut down your computer.

 

7.  Replace the jumper cap from pins 1-2 to pins 2-3.

 

8.  Reboot your computer.

 

9.  Hold down the <Del> key during the boot process and enter BIOS  

 

setup to re-enter data. 

KFN5-Q Series BIOS Recovery Setting

Содержание KFN5-Q - Motherboard - nForce Pro 3600
















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды