ASUS Xonar HDAV .3
4.
If you are using Dolby Digital Live or DTS Interactive encoders through the
S/PDIF output, the analog output will be muted to get rid of the interference
between your digital speaker system and analog speakers or headphones.
Check if this is the case.
5.
Try restart your Windows.
I can’t hear any sound from the S/PDIF output
Instructions:
.
Ensure that you have enabled S/PDIF output in the Audio Center GUI (Main
page)
2.
Ensure that you are connecting the correct S/PDIF output jack on the card to
the decoder’s (AV receiver) S/PDIF input jack
3.
You may need to select the correct input and mode of your decoder or AV
receiver. For Dolby Digital or DTS output, you may have to double check that
the AV receiver is in that decoding mode.
4.
If you are using 2KHz PCM output, please make sure your decoder can
support 2KHz decoding. Try changing it to 44.K or 4KHz first.
I can’t hear audio input (Mic, Line-in, etc.) from my speakers
Instructions:
.
Go to the mixer recording page in the Audio Center and select the correct
input as the recording source (Xonar HDAV .3 uses high-quality dB
digital recording and monitoring to route the input signal through to the
output.) If you are using Windows Vista, please also go to system audio
control panel to see the current default recording/input device is right.
2.
Remember to turn on the digital monitoring button for that recording source.
I can’t hear the TV tuner audio from my speakers
Instructions:
. If you are using a traditional TV tuner card which has analog audio output,
please connect it to the Aux-In header on the audio card
2. Select Aux-In as the recording source and remember to turn on the digital
monitoring button on the recording mixer page
3. If you are using a TV tuner card which has digital audio output instead
of analog, please check that the sound is not muted and whether other
applications can play sound out. If you still have problem, please read the TV
tuner card’s software user guide.
