ASUS Xonar HDAV .3
4.
Installing software
4.1
Installing the card driver
Ensure that you have installed the VGA card driver before installing the Xonar
HDAV driver. Otherwise, driver installation error may occur.
.
After you have installed the Xonar HDAV card, turn on your computer.
Windows
®
automatically detects the HDAV card and searches for device
drivers. When prompted for the drivers, click
Cancel
.
2.
Insert the support CD into the optical drive. If Autorun is enabled in your
system, the setup starts automatically. If not, run
setup.exe from your
support CD.
3.
The installation program will remind you to make sure you have connected
the additional power cable from your power supply unit to the card. If the
power cable is not connected properly, the card will not work at all. If it has
not been done, turn off the computer to install the power cable before you go
on the installation process.
4.
Follow the instructions on the screen to complete the installation. Read the
“END USER LICENCE AGREEMENT” in the process and make sure you
understand and accept it before you continue the installation. When the
installation finishes, you may be prompted to restart your computer. You can
choose to restart the computer later if desired.
