GigaX Series L2 Managed Switch User’s Guide
94
[Engine Id]
[Name]
[Auth Protocol]
[Auth Password]
[Priv Protocol]
[Priv Password]
USM(User-based Security Model) User is used to configure the information of
SNMPV3 USM User. A USM User entry contains a engine Id, name, auth
protocol, auth password, priv protocol and priv password.
CLI command :
snmp snmpv3 usmuser add
EngineId: <engine id string >
Name:
<user name string >
AuthProtocol [oid]: <auth protocol oid string >
AuthPassword: <auth password string>
Priv Protocol [oid]: <priv protocol oid string >
Priv Password: <priv password string >
User can modify a USM User entry in the table by reassigning its allowed
engine Id, name, auth protocol, auth password, priv protocol and priv
password.
CLI command :
snmp snmpv3 usmuser set
EngineId:
(old engine id string )
<new engine id string >
Name:
(old user name string )
< new user name string >
AuthProtocol [oid]: (
old auth protocol oid string
) < new auth protocol oid
string >
Содержание GigaX 2024X
