Asus ESC500 G4 SFF Скачать руководство пользователя страница 65

Страница: 65 / 178

ASUS ESC500 G4

3-19

USB 3.0 connectors (20-1 pin USB3_12)

These connectors allow you to connect a USB 3.0 module for additional USB 3.0 front

or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of

USB 3.0 including faster data transfer speeds of up to 5 Gb/s, faster charging time for

USB-chargeable devices, optimized power efficiency, and backward compatibility with

USB 2.0.

The USB 3.0 module is purchased separately.

•

These connectors are based on xHCI specification. We recommend you to install the

related driver to fully use the USB 3.0 ports under Windows

•

The plugged USB 3.0 device may run on xHCI or EHCI mode depending on the

operating system’s setting.

•

These USB 3.0 ports only support Turbo Mode when using USB 3.0 Boost feature.

Содержание ESC500 G4 SFF



















































































































































































Результаты поиска

Содержание ESC500 G4 SFF

Отзывы:

Asus ESC500 G4 SFF, Руководство пользователя, Страница: 65 / 178

Результаты поиска

Содержание ESC500 G4 SFF

Отзывы: