manualshive.com logo in svg

Asus ESC500 G4 SFF, Руководство пользователя, Страница: 123 / 178

Поделиться
Скачать
Asus ESC500 G4 SFF Скачать руководство пользователя страница 123

ASUS ESC500 G4

4-53

4.11.2  ASUS EZ Flash 3

ASUS EZ Flash 3 allows you to download and update to the latest BIOS through the Internet 

without having to use a bootable floppy disk or an OS-based utility.

Updating through the Internet varies per region and Internet conditions. Check your local 

Internet connection before updating through the Internet.

To update the BIOS by USB:

1. 

Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select 

ASUS EZ Flash Utility

 and press <Enter>.

2. 

Insert the USB flash disk that contains the latest BIOS file to the USB port.

3. Select 

by USB.

4. 

Press <Tab> to switch to the Drive field.

5. 

Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS, 

and then press <Enter>. 

6. 

Press <Tab> to switch to the Folder Info field.

7. 

Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform 

the BIOS update process. Reboot the system when the update process is done.

Содержание ESC500 G4 SFF



















































































































































































Отзывы:

Нет отзывов