manualshive.com logo in svg

Asus ESC4000 G3 Series, Руководство пользователя

Поделиться
Скачать
Asus ESC4000 G3 Series Скачать руководство пользователя страница 38

Chapter 2:  Hardware setup

2-10

2.3 

System memory

2.3.1 Overview

The motherboard comes with sixteen (16) Double Data Rate 4 (DDR4) Dual Inline Memory
Modules (DIMM) sockets.
The figure illustrates the location of the DDR4 DIMM sockets:

2.3.2 

Memory Configurations

You may install 4 GB, 8 GB, 16 GB, and 32 GB RDIMMs or 32 GB or 64 GB LR-DIMMs into 

the DIMM sockets using the memory configurations in this section.

• 

Refer to ASUS Server AVL for the updated list of compatible DIMMs.

• 

When installing only one DIMM in a single CPU configuration, install the DIMM on 

either A1 or B1.

• 

 Always install DIMMs with the same CAS latency. For optimum compatibility, it is 

recommended that you obtain memory modules from the same vendor.

Содержание ESC4000 G3 Series















































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды