manualshive.com logo in svg

Asus ESC1000, Руководство пользователя

Поделиться
Скачать
Asus ESC1000 Скачать руководство пользователя страница 22

Chapter 2:  Hardware setup

2-2

2.1 

Chassis cover

2.1.1 

Removing the side cover

• 

Ensure that you unplug the power cord before removing the side cover.

• 

Take extra care when removing the side cover. Keep your fingers from components 

inside the chassis that can cause injury, such as the CPU fan, rear fan, and other 

sharp-edged parts.

• 

The images of the workstation shown in this section are for reference purpose only 

and may not exactly match the model you purchase. 

To remove the side cover:

1. 

Remove the two screws that secure the 

left side cover of the chassis.

2. 

Slide the side cover for about half an inch 

toward the rear until it disengaged from 

the chassis. Carefully lift the side cover 

and set it aside.

1

1

2

Содержание ESC1000



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды