manualshive.com logo in svg

Asus ESC1000, Руководство пользователя

Поделиться
Скачать
Asus ESC1000 Скачать руководство пользователя страница 188

7-6

Chapter 7: Multiple GPU technology support

4. 

Align and firmly insert the SLI bridge connector to the goldfingers on each graphics 

card. Ensure that the connector is firmly in place.

5.   Connect two independent auxiliary power sources from the power supply to the two 

graphics cards separately.

6. 

Connect a VGA or a DVI cable to the graphics card.

Goldfingers

SLI bridge

7.2.3 

Installing three SLI-ready graphics cards

3-Way SLI bridge

1.   Prepare three SLI-ready graphics cards.

2. 

Insert the three graphics card into the 

PCIEX16 slots. If your motherboard 

has more than two PCIEX16 slots, 

refer to Chapter 2 in this user manual 

for the locations of the PCIEX16 slots 

recommended for multi-graphics card 

installation.

3. 

Ensure that the cards are properly 

seated on the slots.

4. 

Align and firmly insert the 3-Way SLI 

bridge connector to the goldfingers on 

each graphics card. Ensure that the 

connector is firmly in place.

5.   Connect three independent auxiliary 

power sources from the power supply to 

the three graphics cards separately.

6. 

Connect a VGA or a DVI cable to the 

graphics card.

Содержание ESC1000



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды