Asus DN-300-R2, Руководство пользователя, Страница: 40 / 53

3-14
DN-300-R2
Link Status [Disconnected]
Displays the Ethernet connection status.
3.4 Monitor menu
The Monitor menu displays the system temperature/power status, and allows you
to change the fan settings.
CPU / MotherBoard Temperature [xxx
º
C/xxx
º
F]
The onboard hardware monitor automatically detects and displays the CPU/
motherboard temperatures.
CPU / PSU Fan Speed [xxxx RPM]
The onboard hardware monitor automatically detects and displays the CPU /
PSU fan speeds in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A.
CPU Core Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage, VBAT 3.0V
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.
Sensor configuration
HW info SIO Pin Register Calculation
+3V 3VCC Bank0, Index03 3V Voltage = Reading*0.008*2V
+12V VIN2 Bank0, Index05 12V Voltage = Reading*0.008*12V
+5V VIN1 Bank0, Index04 5V Voltage = Reading*0.008*5.02V
Vcore CPUVCORE Bank0, Index00 Vcore = Reading*0.008*2V
Battery VBAT Bank0, Index08 Vbat = Reading*0.008*2V
MB Temperature SYSTIN Bank3, Index0C
Compared to 80H, when <80H, the
temperature is positive. The value
shown on the UI will be temperature.
CPU Temperature CPUTIN Bank3, Index0D
PECI PECI Bank0, Index19
PSU FAN Speed SYSFANIN
Bank0, Index30[bit
15:8], Index31[bit 7:0]
Conversion to decimal is the speed
value.
CPU FAN Speed CPUFANIN
Bank0, Index32[bit
15:8], Index33[bit 7:0]
Conversion to decimal is the speed
value.
CPU Fan Speed Low Limit [Ignore]
This item appears only when you enable the CPU Q-Fan Control feature and
allows you to disable or set the CPU fan warning speed. Configuration options:
[Ignore] [200RPM] [300 RPM] [400 RPM] [500 RPM] [600RPM]
PSU Fan Speed Low Limit [400 RPM]
This item appears only when you enable the PSU Fan Q-Fan Control feature and
allows you to disable or set the PSU Fan warning speed. Configuration options:
[Ignore] [200RPM] [300 RPM] [400 RPM] [500 RPM] [600RPM]
BAT Voltage Low Warning [Enabled]
Allows you to set whether to show a warning message when the BAT voltage is
getting low. Configuration options: [Disabled] [Enabled]