background image

ASUS AP130-D5 Pedestal Server

11

Conventions

Symbols

To make sure that you perform certain tasks properly, take note of the following
symbols used throughout this manual.

WARNING: Information to prevent injury to yourself when trying to
complete a task.

CAUTION: Information to prevent damage to the components when
trying to complete a task.

IMPORTANT: Information that you MUST follow to complete a task.

NOTE: Tips and information to aid in completing a task.

References

Refer to the following sources for additional information and for product and
software updates.

1. ASUS P4B533-M Motherboard User’s Manual

This manual contains detailed information about the P4B533-M
motherboard.

2. ASUS Websites

The ASUS websites worldwide provide updated information on ASUS
hardware and softare products. The ASUS websites are listed in the ASUS
Contact Information on page 5.

3. Optional Documentation

Your product package may include optional documentation such as a
CD-ROM manual, warranty flyers, and others that may have been added
by your dealer. NOTE: These documents are not part of the standard
server package.

Содержание AP130-D5









































Отзывы: