Asus AAEON UP Xtreme UP-WHL01, Руководство пользователя

Страница: 96 / 104

CEC Client Installation 41
CEC C
lie
nt
Inst
allati
on
Supp
le
me
nt
al
Ap
pendix for
UP Xt
rem
e
OpCode Value Description Parameters Response Supported
<Play> 0x41 Used to
control the
playback
behavior of a
source device. [Play
Mode] Perform the specified
actions, or return a
<Feature Abort>
message. If media is
available the device
enters ‘Deck Active’
state. If the device is in
standby, has media
available and the
parameter is [“Play
Forward”] it should
power on.
Yes
5.1.8 Tuner Control
Command Feature: This feature allows a device (e.g. TV) to control another CEC
device’s tuner.
The following messages are used for the Tuner Control feature: <Give Tuner Device
Status>, <Record On>, <Select Analogue Service>, <Select Digital Service>, <Tuner
Step Decrement>, <Tuner Step Increment>, <Tuner Device Status>.
OpCode Value Description Parameters Response Supported
<Give Tuner
Device
Status> 0x08 Used to request
the status of a
tuner device. [Status
Request] Respond with a
<Tuner Device
Status> message,
or stop reporting
changes on
receipt of
the[“Off”]
message.
Yes
<Record
On> 0x09 Attempt to
record the
specified source. [Record
Source] Enter ‘Recording’
state and start
recording if
possible. Send the
initiator <Record
Status>.
Yes
Table Continues on Next Page