Asus AAEON UP Xtreme UP-WHL01, Руководство пользователя

Страница: 90 / 104

CEC Client Installation 35
CEC C
lie
nt
Inst
allati
on
Supp
le
me
nt
al
Ap
pendix for
UP Xt
rem
e
5.1.2 Routing Control
Command Feature: This feature is used to control the routing of the HDMI network by
controlling CEC Switches.
The following messages are used for the Routing Control feature: <Active Source>,
<Inactive Source>, <Request Active Source>, <Set Stream Path>, <Routing Change>,
<Routing Information>.
5.1.3 System Standby
Command Feature: The broadcast message <Standby> can be used to switch all CEC
devices to standby. The following message is used for the System Standby feature:
<Standby>
OpCode Value Description Parameters Response Supported
<Standby> 0x36 Switches one or
all devices into
standby mode.
Can be used as
a broadcast
message or be
addressed to a
specific device. None Switch the device into
Standby. Ignore the
message if already in
standby. Yes
5.1.4 One Touch Record
Command Feature: This feature allows the user to easily start a recording of the source
that is being displayed on the TV, just by selecting a Recording Device and giving the
record command.
The following messages are used for the One Touch Record feature: <Record Off>,
<Record On>, <Record Status>, <Record TV Screen>.
OpCode Value Description Parameters Response Supported
<Record
Off> 0x0B Requests a
device to stop a
recording. None Exit ‘Recording’ state. Yes
Table Continues on Next Page