Asus AAEON SPG-M041, Руководство пользователя

Страница: 35 / 38

Chapter 3 – Gateway Setup and Configuration 24
IO
T G
at
eway
Sy
ste
m
SPG
-M0
41
Reset console driver (new) installation:
• Connect administration computer and IoT gateway console port (micro USB
port) with micro USB data cable
• Disconnect power source from device and use a pointed object to press and
hold Reset button
• Feed power to device and release Reset button.
• Follow prompts on administration computer and complete the console driver
installation
• Console driver is designed for Windows computer only
3.4 Installation and Mounting
This section describes the mounting procedure for the SPG-M041.
The following guidelines are provided to optimize device performance. A review of the
guidelines should be performed prior to device installation.
⚫
Ensure cabling is away from sources of electrical noise. Radios, power lines,
and fluorescent lighting fixtures can interfere with device performance
⚫
Ensure cabling is positioned away from equipment that can damage the
cables
⚫
In ethernet 10/100 fixed port devices, the cable length from the SPG-M041 to
connected devices cannot exceed 100 meters (328 feet)
⚫
Ensure airflow around the SPG-M041 (and respective vents) is unrestricted.
Without proper airflow, the SPG-M041 can overheat. To prevent performance
degradation and damage to the SPG-M041, make sure there is clearance at
the top and bottom and around the exhaust vents.