background image

ASUS A7M266 User’s Manual

95

6.  SOFTWARE REFERENCE

6.3.4 YAMAHA XGplayer Minimize Panel

To open the Minimize Panel, click theMinimize icon 

 on the Main Panel.

6.3.5 Troubleshooting

It cannot be installed.

Is the operating environment saturated?  Check hard disk capacity, memory ca-
pacity, OS, etc.

If the hard disk’s capacity is insufficient, the software cannot be installed. Please
delete unneeded files to provide sufficient vacant space on the hard disk for
installation.

It will not start.

Is the operating environment saturated?  Check hard disk capacity, memory ca-
pacity, OS, etc.

Is the correct procedure being followed during installation? Uninstall the pro-
gram, then try installing it again.

Is the driver section of the Softsynthesizer setting screen Control in the OFF
position? If so, turn it ON.

Is there an SXG Driver being used with some other previously existing MIDI
Player?

The sound cannot be heard, or is not output.

Please check the settings and volume of the computer, amplifier, speakers, etc.

Is the “YAMAHA SXG Driver” set for the computer’s MIDI setting?

Check the MIDI tab under Multimedia in the Control Panel.

Is there an SXG Driver being used with some other previously existing MIDI
Player?

If a demonstration model’s use period has expired, it can be selected, but no
music will be output. It cannot be used with an 8-bit sound card.

Version Information

Power

Master Volume Slider

Help

Return to Original State

Open Mixer

Song Name

Display

Time

Display

Select Previous Song

Select Next Song

Playback

Stop
Pause

6.  S/W REFERENCE

XGPlayer

Содержание A7M266









































































































Отзывы: