7
English
NOTES:
• Ensure that the Mobile Broadband LED lights up before
configuring 4G-AX56 with Mobile Broadband. Turn off the 4G-
AX56 and check the fitting of your Nano SIM card if otherwise.
• 4G-AX56 can be configured to accept either Mobile Broadband
or Ethernet WAN source. Load Balance and Fail Over is also
supported between the two sources if both sources are
available.
• 4G-AX56 automatically detects the ISP connection type at
default state. During the QIS (Quick Internet Setup) process,
you may be asked to key in the PIN code of the Nano SIM card
installed and the APN (Access Point Name) information of the
mobile carrier in order to receive connection.
Mobile Broadband LED indications
LED
Indications
Mobile
Broadband
LED
White
Connected to 4G mobile broadband
Cyan
Connected to 3G mobile broadband
Red
Cannot connect to mobile broadband
Off
No Nano SIM card detected
WAN (Internet)
LED
White
Wired broadband is online
Red
Wired broadband is offline
Power
White
4G-AX56 is powered on
Off
4G-AX56 is powered off
5GHz
White
5GHz WiFi is enabled
Off
5GHz WiFi is disabled
2.4GHz
White
2.4GHz WiFi is enabled
Off
2.4GHz WiFi is disabled