AstroStart BBF, Руководство по установке, Страница: 5 / 30

3
Quick Guide for Skilled Installers
This section of the installation manual is intended for experienced installers of remote starter and
mobile security products. Only the most frequently needed information are included in the following few
pages. It has been laid out to quickly access connection and operational details to maximize your
installation performance.
If, for any reason, additional information is required on a specific wire, refer to the “Detailed Description”
section on page 9.
Note concerning vehicles equipped with an immobilization system
When the remote starter is installed on a vehicle equipped with a transponder type immobilization
system, it is preferable to complete the installation of the
control module and to test it before
proceeding with the connection of the interface that neutralizes the vehicle's immobilization system
(Starter Kill). See details in “Step 2: Full Start Test” on page 25
Each wire that provides a (-)
output can supply only one
single standard Bosch
style automotive relay.
DESCRIPTION OF CONNECTORS
P1 - Alarm Inputs/Outputs (optional)
P2 - Start Inputs/Outputs
P3 - Locking/Unlocking relays
P4 - Power Inputs/Outputs
P5 - Programmable function relay
P6 - Shock sensor
P7 - Other sensor
P9 - LED (Status) - Alarm, Antitheft and
Security sequence status LED
P10 - Programmable timer
P11 - Valet switch
P12 - Manual Interface
P13 - Main switch
P15 - Receiver
P16 - IM / OM Interfaces
Please note,
Yellow - accessory (YEL) and
Green – Parking Light (GRN) wire
can be program for different usage.
(See Stage 2 - Level 1 & 2
of the programming section)
FUTURE UTILITY
FUTURE USE
USAGE FUTURE
USAGE FUTUR