10
If you are not sure you have received confirmation, repeat the command. The system will repeat
the confirmation as often as you wish.
PANIC
Panic mode is used to attract attention in a situation of emergency.
Press and hold
or for at least 4 seconds to trigger the panic mode of your vehicle. Refer to
your vehicle’s owner’s manual for your available options.
Panic mode can be cancelled by pressing
.
START COMMANDS (FOR REMOTE-START CAPABLE SYSTEMS ONLY)
STARTING THE ENGINE
To start the engine, press the
button.
The system automatically adjusts the ignition duration for your type of vehicle (gas or diesel); the
parking lights flash then stay on when the engine is running.
Note: In a case where your RF Kit is used to operate a GM OEM remote starter, refer to the
vehicle’s owner’s manual for details of operation.
When the start command is transmitted, the system
immediately sends out one of two possible confirmations:
1.
the vehicle can start.
2.
the vehicle will not start.
System starting
Large Remote
Start icon
appears on
remote
The vehicle won't start if, for example, the hood is open. In
this case, the parking lights flash and the text field shows
“remote start failed”.
System not starting
Error code, text
field
The text field
displays an error
code
If the vehicle starts, the system will automatically send
another confirmation, with a melody, after a few seconds.
Successful start
Small Remote
Start icon and a
melody is played
UPON ENTERING YOUR VEHICLE...
DO NOT TURN IGNITION KEY TO START POSITION.
Automatic transmission vehicles
To avoid turning the engine off when taking place behind the steering wheel, do not apply the
brakes until you have placed the key in the ignition and turned it to the RUN position.
Drive as usual.