INTRODUCTION
Thank you for having chosen the item. You will see you have acquired a powerful
and versatile device. Unpack your item. Before you initial start-up, please make sure that there
is no damage caused by transportation. Should there be any, consult your dealer and do not
use the device.
SAFETY INSTRUCTIONS
Be careful with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wires!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
For your own safety, please read this user manual carefully before you initial start-up.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do
not switch it on immediately. The arising condensation water might damage your device.
Leave the device switched off until it has reached room temperature. Never let the power-cord
come into contact with other cables! Handle the power-cord and all connections with the mains
with particular caution! Make sure that the available voltage is not higher than stated on the
rear panel. During the operation, the housing becomes very hot. Do not switch the device on
and off in short intervals as this would reduce the lamp’s life.
Never look directly into the light
source, as sensitive persons may suffer an epileptic shock (especially meant for epileptics)!
Keep away from children and amateurs! This product is designed for indoor use only. This
device is designed for professional use, e.g. on stages, in discotheques, theatres etc. The
minimum distance between light-output and the illuminated surface must be more than 0.5
meters. Always fix the fixture with an appropriate safety-rope. The maximum ambient
temperature t
a
= 45° C must never be exceeded. Operate the device only after having become
familiar with its functions.
Features
Three operation modes: DMX 512 protocol, auto, master/slave, 1w high mcd red led: 6*4pcs,
1w high mcd green led: 6*4pcs and 1w high mcd blue led: 6*4 pcs operating in various modes
to form different led effects with 4 pcs of LED modules
Installation
On the rear panel of the item you can find an XLR-jack (DMX Out) and an XLR-plug (DMX In),
which can be used for connecting several devices. Choose the device which is to control the
effects. Connect the DMX OUT-jack with the DMX IN-plug of the next device.
DMX-512 connection / connection between fixtures
The wires must not come into contact with each other, otherwise
Occupation of the XLR-connection:
If you are using controllers with this occupation, you can connect the DMX-output of the
controller directly with the DMX-input of the first fixture in the DMX-chain. If you wish to
connect DMX-controllers with other XLR-outputs, you need to use adapter-cables.
Building a serial DMX-chain:
Содержание COLOR HYPERION
Страница 1: ...COLOR HYPERION...
