Astrol Electronic AG reserves the right to change specifications without notice
Bat FLEX Manual
8/19
AD-10069-007 Rev. 03
3.
CCCC Setup
3.1.
Preparation
First of all the CCCC-Folder needs to be moved from CD to the local hard drive. From there the application can be started by executing
„cccc.exe“. No additional installation is required.
3.2.
Communication Setup
After setting the IP address correctly the application needs to be restarted.
On startup the application searches for a viable device on the
Network. If the device is not yet configured, the first action after
the main window shows up is to get into the communication
setup by right-clicking on „Astrol Box <x>“.
Devices can be connected troughSerial Port (BatSmall Series) or
Ethernet (BatFlex Series). This Manual focuses on the Ethernet
Version.
The important parameters are marked red:
IP Address: The device IP address, can be configured
on the small device screen.
Network device port: Communication port ,default
port is 16723
Communication mode has to be set to „Ethernet
UDP/IP“.
