Astrol Electronic AG reserves the right to change specifications without notice
Bat FLEX Manual
10/19
AD-10069-007 Rev. 03
4.
Set up the Measurement Program
4.1.
Introduction
Each measurement consists of 3 different files. All files are readable with a text editor.
Type
Function
Measurement Program File (*.mpr)
This file contains the general structure of the measurement. It can
be created with the Editor Tool (CCCC Tool). If one wants to
implement a custom software or script to create measurement
flows,one should refer to the step syntax documentation.
Data File(*.dat)
The Data File is created by the CCCC Software during a
measurement. It contains the measurement data recorded by the
device.
Log File (*.log)
This File contains all the events that took place during the
measurement. For example if the measurement was canceled or if
a counter was set to a specific value during the data recording.
The files should not be separated from each other during a measurement. Otherwise the CCCC Software will not recognize preexisting
data and is going to create a new Data File in the folder of the Measurement Program File.
However if one likes to share the data after a recording, it is sufficient to pass
just the Data File because it contains all the essential information to visualize
the results.
This window shows the configuration page of a
cyclovoltametric step
