AstroJet 3600P? 3800P, Руководство оператора, Страница: 12 / 34

SECTION 2
INSTALLING THE PRINTER
8
Adjusting the Printer to the Media
Place one piece of media on the center of the
conveyor portion of the Feeder and adjust the Side
Guides
[1] to the media. Use one or two Center
Straps [2] to help hold the media down. The Center
Belt has a vacuum-assist feature that can be turned
ON with the Vacuum Transport Switch located
above the Motor Circuit Breaker as required. It is
useful in feeding smaller size stock.
NOTE: The two narrow Belts can be moved
by turning the Printer ON and sliding the
Belt Guide Adjusters located under the
Conveyor Table in the appropriate direction
until they are under the media.
Optional Feeder Setup and Operation
1. Release the Separator Locking Lever and raise the
Separators to their up position as shown.