ASTRO DM-3106, Инструкция по эксплуатации, Страница: 46 / 89

36
3.4.20 Setting peaking ON/OFF
1. Press the MENU switch.
2. Turn the adjustment dial to select OTHERS , and press the ENT switch.
3. Turn the adjustment dial to select Peaking , and press the ENT switch to
select ON or OFF.
3.4.21 Adjusting the hue
1. Press the PEAK/HUE switch, and select Hue.
2. Turn the adjustment dial to adjust the hue value.
SW R.C.
The hue value can be adjusted in a range from -179.0 to 180.0°.
Each time the PEAK/HUE switch is pressed, the value which is to be
adjusted changes in the following sequence: Peaking
→ Hue → exit
adjustment.
To return the hue value to the initial setting, hold down the adjustment dial.
NOTE
This adjustment takes effect only when YPbPr is selected by Color Space .
When GBR has been selected by Color Space , Hue will not be selected
even when the PEAK/HUE switch is pressed. CAUTION
When GBR has been selected by Color Space , the peaking level of the G
signal is adjusted.
When 1080i format signals are input, horizontal stripes may be conspicuous
on the screen if a high level of peaking is applied while the aspect ratio is set
to 16:9. CAUTION
Even when peaking has been set to ON, the peaking function will not take
effect if the peaking adjustment amount is zero.
CAUTION