ASTRO DM-3106, Инструкция по эксплуатации, Страница: 44 / 89

34
3.4.16 Adjusting the Pr (Cr) value
1. Press the CHROMA switch, and select Pr (Cr) only.
2. Turn the adjustment dial to adjust the Pr (Cr) value (color difference signal
level).
3.4.17 Adjusting the Pb (Cb) and Pr (Cr) values simultaneously
(adjusting the chroma)
1. Press the CHROMA switch, and select Pb (Cb) and Pr (Cr) at the same time.
2. Turn the adjustment dial to adjust the chrominance value (color difference
signal level).
The color difference level can be set within the range of 0.0 to 200.0%
(refer to “4.5 Concerning the adjustment values”).
Each time the CHROMA switch is pressed, the value which is to be adjusted
changes in the following sequence: CHROMA
→ Pb (Cb) → Pr (Cr) → exit
adjustment.
To return the Pr (Cr) value to the initial setting, hold down the adjustment
dial.
NOTE
This adjustment takes effect only when YPbPr is selected by Color Space . CAUTION
The color difference level can be set within the range of 0.0 to 200.0%
(refer to “4.5 Concerning the adjustment values”).
When Pb (Cb) or Pr (Cr) reaches the maximum or minimum level, no further
adjustment is possible.
Each time the CHROMA switch is pressed, the value which is to be adjusted
changes in the following sequence: CHROMA
→ Pb (Cb) → Pr (Cr) → exit
adjustment.
To return both the Pb (Cb) and Pr (Cr) values to the initial settings, hold
down the adjustment dial.
NOTE
This adjustment takes effect only when YPbPr is selected by Color Space . CAUTION