PROGRAMMING TABBER
34
9.
Install Tab Unwind Sensor Block
[8]
over
Tab Sensor (
as shown
). Adjust Label
Tension Spring
[9]
so it touches label but
does not press label against Bin (
as shown
).
10.
To program job, refer to
“
Program Job
–
Single Tab
”
.
Applying Single Stamps
Applying a stamp to an envelope is similar to applying labels. Main difference is in positioning
of the stamp in the proper place on the envelope.
Applying Multiple Stamps
Multiple stamps should be treated the same as applying a single stamp or label. Use the same
programming procedure as with applying multiple tabs. Select up to three Tabs (
Stamps
) then
select
Together
instead of
Separate
. This permits you to apply up to two or three stamps
together on media.
