ADG100
GREASE GUN DRILL ADAPTER
MODEL:
PRODUCT TYPE:
Page 4
1. Set your power tool to “FORWARD” mode, “reverse” mode is not recommended.
2. Evacuate air pocket from container tube if necessary. (See instructions on Page 6)
3. Insert the end of the grease coupler at the end of the hose onto your intended grease fitting. Ensure that the
coupler's adjustable jaws are at the tightness you require.
4. Depress the trigger on your power tool to start work.
Switch operation:
When the trigger switch is depressed, the tool rotates.
When the trigger switch is released, the tool stops.
5. The end of operation
Take off the battery pack or air source in advance to avoid accidents.
WARNING
Do not exceed recommended pressure when operating to avoid serious injury or mechanical damage.
Read your power tool’s safety instruction manual carefully before using this universal
coupling-greaser.
* CAUTION:
•
To reduce the risk of injury, keep hands and away from the outlet and all moving parts.
•
Release the trigger when grease filling is full. If switched repeatedly, it could cause the Motor to
overheat, resulting in mechanical damage or injury.
* NOTE: A buzzing noise is produced when the motor is about to operate on brushed motor power
tools, this noise is normal.
VI. OPERATION
• Although the products described in this catalogue have been designed and manufactured to the highest
standard of quality and safety, they are powerful devices capable of producing high pressure. Misuse or
misapplication of this equipment can cause component rupture, fire or explosion and result in serious
bodily injury, including fluid injection or splashing in the eyes or on the skin. Seek medical attention
immediately if such injuries occur. The attending doctor will need to know the exact nature of the fluids
injected into the victim before treatment can begin.
• Any pressurized system is only as strong as its weakest component. Never exceed the maximum working
pressure of the lowest-rated component in the system. Check and tighten all connections, fitting and hoses
regularly. A worn or damaged hose can rupture, harming both people and property.
• Do not hold nylon hose while pumping the grease gun.
• Regular product inspection and maintenance, coupled with responsible operation, are required for
continued safe operation of these products.
• Always wear safety glasses or eye shields when operation power tools.
VII. SAFETY INSTRUCTION
