(Power tool is not included)
CONTAINER TUBE
BOTTOM
CAP
GUN HEAD
PRESSURE-VENT
PROTECTOR
AIR VENT VALVE
18" HIGH PRESSURE
NYLON HOSE
GEAR CAP
GEAR HOUSING
SHANK
BUTTERFLY
LOCK PLUG
HOLDER
STOPPER
PLUNGER
HANDLE
IV. FUNCTIONAL DESCRIPTION
V. HOW TO ASSEMBLE
NOTE:
• The information contained in this Instruction Manual is designed to assist you in the safe operation and
maintenance of the power tool.
• Never operate, or attempt any maintenance on the tool unless you have first read and understand all safety
instructions contained in your power tool’s manual.
• Some illustrations in this Instruction Manual may show details or attachments that differ from those on your
own power tool.
1. Load grease cartridge or pack container tube before use. (See instructions on Page 5)
2. Remove any bits, parts or attachment currently in your power tool's chuck.
3. Unscrew the chuck. Join and couple your power tool to the shank of
the grease gun adapter via the chuck properly (around 1/4-5/16" from
gear housing). Tighten chuck securely.
4. Unscrew the butterfly lock plug to allow proper room for the container tube
and your power Tool. Install the holder in the space between container tube
and power tool.
5. Adjust the holder to proper position. (available inner width for power tool is
1.5" to 3"). Tighten the butterfly lock plug securely.
6. Install the 18" nylon hose to the gun head and tighten with a wrench securely.
III. INSTRUCTIONS
ADG100
GREASE GUN DRILL ADAPTER
MODEL:
PRODUCT TYPE:
Page 3
