2-1/4 GALLON PRESSURE TANK
PT2-4
PT2-4GH
TROUBLE SHOOTING CHART:
MAINTAINANCE: CLEANING EQUIPMENT:
ACCESSORY ITEMS:
MODEL:
PRODUCT TYPE:
Page 3
1. Turn off the main air supply to the tank.
2. Relieve all pressure from the tank by pulling the ring on safety valve until the pressure bleeds down.
3. Turn T-handle adjusting screw on tank regulator counterclockwise until no spring tension ids felt.
4. Loose thumb screws, tip clamps back and tip tank lid to one side.
5. Loose spray gun air cap retaining ring about three turns.
6. Turn on the air supply.
7. Cup cloth over air cap on the gun and pull trigger. This will force material back through the hose, into the tank.
8. Empty and clean tank and parts which come in contact with material. Use a suitable solvent.
9. Pour solvent into the tank.
10. Replace lid and tighten thumb screws and clamps.
11. Spray until clean solvent appears.
12. Repeats steps 4-7
Note: Keep the safety valve clean at all times.
Problem
Cause
R
emedy
Air escaping from port on
regulator cap.
B
roken or damaged
diaphragm.
R
eplace diaphragm.
Pressure
creep age
registered on gauge
D
irty or worn valve seat in
regulator.
Clean or replace valve seat.
M
aterial tends to settle out
rapidly.
N
ot enough agitation of
material.
I
ncrease agitation.
F
luid or air leak at lid gasket
D
efective lid gasket
or
Thumb screw not tight
R
eplace
or
Tighten
Note: Check gauge occasionally. The position of the needle should return to zero with no pressure on the gauge.
Air Regulator Kit
For use when independent and accurate pressure control of both air and fluid is necessary. Used with portable air
compressors or with ant lines when no other means (air transformers or regulator) of air pressure regulator is available.
Air Adjusting Value
Lets operator control and reduce air usage at the gun. Ideal for low pressure spraying.
Lid Gasket-Rubber
For use when materials being sprayed are not compatible with thiokol gasket.
Intake Strainer
Connects to fluid inlet tube, prevents lumps and foreign matter from entering fluid lines.
