Page 3
6. Feed one piece of media through Printer. Adjust
two Exit Guides to ride on media.
NOTE:
To prevent smearing, make sure Exit
Guides do not track over any printed
information.
7. Turn Printer ON. Turn Media Thickness Knob to
set initial Printhead height as follows:
NOTE: These are initial settings. It may be
necessary to adjust Media Thickness Control to
optimize print quality.
8. Press
ONLINE.
Press
ENTER
to test-feed media.
Step 5
Install Print Driver
Load
“Printer Drivers”
CD into computer's
CD/DVD drive.
If
“Drive Installation CD”
launch window appears,
you can ignore it.
DO NOT TURN PRINTER POWER ON YET
1. With Printer connected to computer via USB or
parallel port, turn Printer
ON
. In a few minutes
“Welcome to the Add New Printer Wizard”
opens. Click
Next>
.
2.
“User Information”
screen. Type in your
company and name. Click
Next>
.
Media Thickness
Dial Setting
0.004" to 1/32"
0 to 2
1/32" to 1/8"
2 to 3
1/8" to 5/16"
3 to 7
5/16" to 3/8"
7 to 10
