Page 1
Step 1
Unpack Printer and Accessories
Place Printer on a stable surface at least
12”
from any walls. Save packaging material.
Attach Side Media Guides, Rear Media Support
and Rear Media Guide.
Step 2
Connect Power to Printer
1. Main power switch is turned OFF.
2. Plug power cord into Printer receptacle.
3. Plug other end into 115-220 Volt AC, 50/60 Hz.
grounded outlet.
DO NOT TURN POWER SWITCH ON YET
Connect Printer to Computer
Printer has both USB and Parallel Ports.
(
Located on Side Cover as shown
.)
USB Cable Users:
Plug USB cable from computer into P
rinter’s
USB port.
Parallel Cable Users:
Plug Parallel Printer Cable from computer
into Printe
r’s Parallel Port. Latch two locking clips.
AstroJet
2650P-2800P
Quick Start Guide
