Nexus DSC
Pro
Quick Setup Guide
8
Now select a star and point the telescope at the
selected star.
Betelgeuse
was selected in this
example. The telescope cursor will most likely
be quite far from the selected star unless the
telescope is levelled and pointing north when
the altitude reference was performed. The
telescope cursor does not have to be over the
selected star:
Once the star is precisely in the centre of the
field of view touch the
Align
button. A popup
window will appear to confirm the alignment:
Touch the
Align
button to confirm. Nexus DSC
Pro
will produce a short beep if sounds are
enabled. The telescope cursor will now be
located precisely over the selected star:
Select another star and perform the same
procedure for the second star.
You can check if the alignment was successful
by going to
Alignment Status.
Alignment object screen
Alignment object screen has four tabs:
CATALOGUE, OBJECT, INFO and HELP. You
can use
and
keys to switch between
the tabs. The OBJECT tab is selected by
