Astria.US.com
126823-01C
20
INSTALLATION
Continued
7. Place the right crossover log (#7) on top
of the middle log and rear log as shown
in
Figure 35
. Match the round peg on the
top of the rear log with the round hole on
the bottom of the right crossover log and
square peg on the top of the middle log
with the square hole on the bottom of the
right crossover log.
8. Match the round hole on the bottom of the
center crossover log (#8) with the metal
pin on the top of the right crossover log.
Rest the front of the center crossover log
on top of the front right log and against the
grate as shown in
Figure 36
. See
Figure
37
for
fi
nal assembly.
7
Figure 35 - Installing Log # 7
8
Figure 36 - Installing Log # 8
Figure 37 - Final Assembly
TimberOak (18, 24, 30) LOG PLACEMENT
It is very important to install the logs exactly as
instructed. Do not modify logs. Only use logs
supplied with appliance or as identi
fi
ed for use
with the heater as shown in
Figure 21, Page
16
. Each log includes reference numbers
formed in the bottom or back of the log. The
circled number indicates the order it is placed
on the burner system. The remaining numbers
indicate the size burner system the logs are
designed to
fi
t. For example, the
fi
rst log for
a 24 inch burner system will include a circled
1 and also a 24. The circled 1 indicates this
is the
fi
rst log to be installed. The 24 indicates
this log belongs to a 24 inch log set.
1. Place the rear log (#1) on base assembly
as shown in
Figure 38
. Log will
fi
t over
right end of burner and rest in middle of
U-burner.
1
Figure 38 - Installing Log # 1
''U'' -
Burner
Base
assembly
